- Aug 03, 2017 -
Latex gloves are one of the gloves, it is different from the usual gloves, made from latex. Can be used as home, industrial, medical, beauty and other industries to use, is the necessary hand protection supplies. The use of natural latex, together with other fine additives processed latex gloves, the product through a special surface treatment, comfortable to wear, in industrial and agricultural production, medical, daily life has a wide range of applications.
The rubber is first sliced by a rubber mill, sliced and sent to the sol-gel and gasoline mixed sol. The sol is then emulsified and modulated by a latex intermediate tank. The rubber solution dissolved in gasoline is fed from the top of the distillation column, heated by steam, and the light component is heated to the gas phase. The gasoline and gas is mixed and cooled by the cold water in the oil and gas cooler. Oil-water mixture to oil-water separator, oil and water stratification. The upper part of the gasoline recovery, the lower part of the water and then pumped to the cold water tower cooling, cooling and then cooling the distillation column of gas gasoline; distillation tower latex according to their own pressure to send latex mixing mixer, after the preparation of the centrifuge to separate the latex, After the color, filter after use.
Glove model first by acid-base cleaning, water cleaning, washing the model first immersed in hot water after heating to immersion coagulation agent and drying for dipping. Dipped in the oven after the initial drying, plus fiber sets, hot water and then sent to the oven curing, drying molding. Glove after stripping inflatable inspection, low temperature stereotypes, the temperature dry, washed, dehydrated, dried and then packaged to send finished goods warehouse.
(2) the production process to produce a small amount of ammonia; (3) the dust generated by the drying process; (4) SO2, NOx, particulate matter produced during the operation of the boiler, etc. (2) the production process produces a small amount of ammonia; Air pollutants; (5) emissions of SO2, NOx, particulate matter and other air pollutants generated during the operation of the standby diesel generator; (6) waste from the production process; and (7) sludge from the sewage treatment station.
Water treatment process using physical and chemical, biological contact oxidation and activated carbon adsorption. The process consists of mechanical grille, regulating pool, air float pool, biological contact oxidation tank, sedimentation tank, sand filter and activated carbon filter, fan room and so on. Exhaust gas treatment process by Wenqiu linite dust collector, and then with the alkali-containing water reaction, desulfurization dust.
Latex gloves for automotive manufacturing, battery manufacturing; glass steel industry, aircraft assembly; aerospace; environmental clean and clean. Latex gloves with wear resistance, puncture resistance; anti-acid, grease, fuel and a variety of solvents, etc .; has a wide range of chemical resistance, anti-oil effect is good; Latex glove features a unique fingertip texture design, greatly enhance the grip, effectively prevent slipping; no palm patented design, invasive glue uniform, enhanced protection; unique hand design, cotton lining, improve comfort.
Gloves, according to the material points are cotton yarn, plush, leather and so on. The commonly used material for making gloves is fiber.
Lining material --- thermal design PVC
The best anti-skid program
PU or latex coating - suitable for oily or greasy environments.
Several commonly used gloves Material:
(1) wire - a common stainless steel wire, also has chrome alloy wire, mainly used to make anti-cut gloves. This kind of material anti-cutting performance of the strongest, and easy to clean, but the quality, the use of inconvenient.
(2) Kevlar, Spectra and other synthetic yarn - is also a good synthetic fiber anti-cutting material, although the anti-cutting ability than wire, but light, comfortable, and improved and processed, and some products can achieve anti- The highest level of the standard.
(3) nitrile (with fabric lining) - with anti-wear and anti-piercing performance, the use of flexible and comfortable.
(4) natural latex (with fabric lining) - with excellent flexibility, especially flexible, have a certain anti-wear, tear resistance and anti-cutting performance.
(5) PVC (with fabric lining) - can provide a certain wear and piercing protection, if the material is thick, but also can have a certain anti-cutting ability, but not tear.
(6) leather - natural material, through a variety of tanning treatment, has a unique performance. Skin can be divided into: cowhide, its advantages are comfortable, durable, breathable wear and tear, after chrome trampling treatment, more durable, and can resist high temperature; pig skin, large pores, the best air permeability, after washing can still keep very good Of the softness, and will not harden; sheepskin, is the most comfortable, the most durable and anti-wear performance of the best, but because the price is too expensive, generally only used in the touch requirements of the industry.